Danby DPAC120011H Air Conditioner 用户手册

设备 Danby DPAC120011H Air Conditioner 用户手册

Danby DPAC120011H Air Conditioner 用户手册

内容摘录

页面上的内容摘要 No. 1

• PORTABLE AIR CONDITIONER• CLIMATISEUR PORTATIFOwner’s Use and Care GuideGuide d’utilisation et soins de PropriètaireModel • ModèleDPAC120011HV2.03.11.DM

页面上的内容摘要 No. 2

ContentsPORTABLE AIR CONDITIONEROwner’s Use and Care Guide• Welcome ..............................................................2• Important safety information ................................3-4• Identifying Parts ...................................................4-6• Operating Instructions ..........................................7-10• Operation of wireless remote control ...................10-11• Installation instructions .........................................12-15• Car

页面上的内容摘要 No. 3

WelcomeThank you for choosing a Danby appliance to provide you and your family with all of the “Home Comfort” requirementsof your home, cottage, or office. This Owner’s Use and Care Guide will provide you with valuable information necessaryfor the proper care and maintenance of your new appliance. If properly maintained, your Danby appliance will give youmany years of trouble free operation. Please take a few moments to read the instructions thoroughly and familiarizeyourself with all of t

页面上的内容摘要 No. 4

Important Safety InformationREAD AND FOLLOW ALL SAFETY INSTRUCTIONSTo prevent injury to the user or other people and property damage, the following instructions must be followed.Incorrect operation due to ignoring these instructions may cause harm or damage.SAFETYPRECAUTIONSALWAYS DO THISYour air conditioner should be used in such a way that it is protectedfrom moisture. e.g. condensation, splashed water, etc.Do not place orstore your air conditioner where it can fall or be pulled into water ora

页面上的内容摘要 No. 5

Important Safety InformationREAD AND FOLLOW ALL SAFETY INSTRUCTIONSTo prevent injury to the user or other people and property damage, the following instructions must be followed.Incorrect operation due to ignoring these instructions may cause harm or damage.ENERGY SAVING TIPS• Use the unit in the recommended room size.• Locate the unit where furniture cannot obstruct the air flow.• Keep blinds/curtains closed during the sunniest part of the day.• Keep the filters clean.• Keep doors and

页面上的内容摘要 No. 6

Identifying PartsACCESSORIESPARTSPART NAMEQUANTITYExhaust hose and AdaptorWindow slider kit and bolt.1 SetBand (For bundling thepower cord) *1 pcFoam Seal3 pcAUTOMODEOTEMP.( C)T E M P.LEDTURBORemote Controller and 2-AAABatteries included1 setCheck all the accessories are included in the package and please refer to the installationinstructions for their usage.NOTE: All the illustrations in this manual are for explanation purpose only. Your air conditioner maybe slightly different. The actual shap

页面上的内容摘要 No. 7

Identifying PartsFRONT21. Operation Panel142. Horizontal Louver Blade (Lift it up duringoperation)3. Air intake (air filter inside)34. Carrying Handle (both sides)NOTE: The illustrations are for explanationpurposes only. The actual shape of the machineyou purchased may be slightly different. The actualshape should prevail.REAR5. Air intake566. Power cord outlet127. Drain Outlet A (Used on dehumidifyingoperation)8. Drain Outlet B (Keep the drain outlet B plugged)979. Air Outlet10. Air intake (Air

页面上的内容摘要 No. 8

Operating InstructionsCONTROL PANELBefore you begin, thoroughly familiarize yourself with the control paneland remote controller and all its functions, then follow the symbol for thefunctions you desire. The unit can be controlled by the unit control panelalone or with the remote controller. Fig.3NOTE:The following illustration is for explanation purposes only. Theactual shape of the control panel of the unit you purchased may be slightlydifferent. But the functions are the same.Fig.3autoTurboON

页面上的内容摘要 No. 9

Operating InstructionsINDICATOR LIGHTSON THE DISPLAYWINDOWTimer on indicatorONOFFautoSleep operationnTimer off indicatorAuto operation indicatorTurboTurbo displayCooling operation indicatorDry operation indicatorFan operation indicatorHeating operation indicatorFan Speed IndicatorLow --------Medium---High --------Display WindowShows the set temperature in °C or °F and displays error codes.Room temperature sensor errorUnplug the unit and plug it back in. If error repeats, call for service.Evapo

页面上的内容摘要 No. 10

Operating InstructionsBUTTON FUNCTIONSON CONTROL PANEL2)/UP/ DOWN BUTTONS• Used to adjust (increasing/decreasing) temperature settings(1°C/2°Fincrements) in a range of 17°C(62°F) to 30°C(88°F).NOTE: The control is capable of displaying temperature in degreesFahrenheit or degrees Celsius. To convert from one to the other, pressand hold theandbuttons at the same time, for 3 seconds.• Under Auto-timer setting, press or hold thebutton to changethe Auto time by 0.5 hour increments, up to 10

页面上的内容摘要 No. 11

Operating InstructionsOPERATING INSTRUCTIONSCOOL feature• Press the "MODE" button until the "" indicator lightcomes on.• Press thebuttons to select your desiredroom temperature. The temperature can be setwithin a range of 17°C-30°C/62°F-88°F.• Press the "" button to choose the fan speed.FAN feature• Press the "MODE" button until the "" indicator lightcomes on.• Press the "" button to choose the fan speed.The temperature cannot be adjusted.TIMER feature• When the unit is on, first

页面上的内容摘要 No. 12

Operation of wireless remote controlPARTIDENTIFICATION:10)11)Fan Speed Selection button: Pressing alternates between available fan speeds (some operations only).Power On/Off button: Pressing activates or deactivates operation of the machine.NOTE: To disconnect power completely, the power cord must be removed after deactivating the machine.12)Sleep button:Select this funtion during the sleeping time. It can maintain the most comfortable temperature andsave energy. This function is available on CO

页面上的内容摘要 No. 13

Installation InstructionsLOCATION• The air conditioner should be placed on a firm foundation to minimizenoise and vibration. For safe and secure positioning, place the unit on asmooth, level floor strong enough to support the unit.• The unit has casters to aid placement, but it should only be rolled onsmooth, flat surfaces. Use caution when rolling on carpet surfaces. Usecaution and protect floors when rolling over wood floors. Do not attemptto roll the unit over objects.• The unit must be

页面上的内容摘要 No. 14

Installation InstructionsINSTALLATION IN ADOUBLE - HUNG SASHWINDOW1. Cut the foam seal (adhesive type) to the proper length and attach it tothe window stool. Fig.82. Attach the window slider kit to the window stool. Adjust the length ofthe window slider kit according to the width of window, shorten theadjustable window kit if the width of window is less than 26.5 inches.Open the window sash and place the window slider kit on the windowstool. Fig.93. Cut the foam seal(adhesive type) to the proper

页面上的内容摘要 No. 15

Installation InstructionsINSTALLATION IN ASLIDING SASHWINDOW1. Cut the foam seal (adhesive type) to the proper length and attach it tothe window frame. See Fig.12.2. Attach the window slider kit to the window stool. Adjust the length ofthe window slider kit according to the height of window, shorten theadjustable window kit if the height of window is less than 26.5 inches.Open the window sash and place the window slider kit on the windowstool. See Fig.13.3. Cut the foam seal (adhesive type) to t

页面上的内容摘要 No. 16

Installation InstructionsEXHAUST HOSEINSTALLATION:The exhaust hose and adaptor must be installed or removed inaccordance with the usage mode.COOL or AUTO modeInstallFAN,DEHUMIDIIFY or HEAT modeRemove1. Install the window Exhaust adaptor (flat mouth) onto the exhausthose as shown in Fig.16. Refer to the previous pages for window kitinstallation.2. Install the flexible Exhaust hose as shown in Fig 17 and Fig 18.Fig.16ADAPTERFig.17Fig.1815

页面上的内容摘要 No. 17

Care and MaintenanceWATER DRAINAGEDuring Dehumidifying modes, remove the drain plug A from the back ofthe unit (Fig.21), install the drain connector (5/8” universal femaleconnecter) with 3/4” hose (locally purchased).when the level of the bottom tray reaches a predetermined level, the unitbeeps 8 times, the digital display area shows “P1” and the unit stopsoperating. Carefully move the unit to a drain location, remove the bottomdrain plug and let the water drain away (Fig.24). Restart th

页面上的内容摘要 No. 18

Care and MaintenanceCLEANING1) Be sure to unplug the unit from the power before cleaning orservicing.2) Do not use gasoline, thinner or other chemicals to clean the unit.3) Do not wash the unit directly under a tap or using a hose. It may causeelectrical damage or danger.4) If the power cord is damaged, it should be repaired by the manufacturer(Please call the service depot)5) Use a lint-free cloth soaked with neutral detergent to clean the unitenclosure. Finish cleaning by using a dry clean clo

页面上的内容摘要 No. 19

TroubleshootingOccasionally a problem may arise that is minor in nature, and a service call may not be neccessary. Use thistroubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depotor Danby’s Toll Free Number 1-800-263-2629 for assistance.PROBLEMUnit does not startwhen pressing on/offbuttonNot cool enoughPOSSIBLE CAUSE• Dump the water out.• The windows or doors in the roomare not closed.• Make sure all the windows and door

页面上的内容摘要 No. 20

LIMITED IN-HOME APPLIANCE WARRANTYThis quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operatingconditions intended by the manufacturer.This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter“Danby”) or by an authorized distributor of Danby, and is non-transferable.TERMS OF WARRANTYPlastic p

留下评论